Відео

Thanks!

Good one lad, just starting again after a 2 year break and forgot all of this.

Thanks for this!

Can the server be added back?

Helped a lot. Thank You !!

Shouldn't they be connected to 0v and 24v connectors?

New to trying coding, so I did learn today that Return can only work ath th bottom of a function.

Thank you , it is very helpful.

Straight up game changing. Thanks!

Thank you this was great. Could you show writing the code for the words that begin with a vowel or direct me to a video for converting to pig latin

This helped me out a great too I just found out you can also turn on the laser when framing so much better!!

NO PATTERN WILL SHOW!

This was beyond helpful, thank you. Specifically the "Fire" setting. Been driving me crazy trying to line things up by eyeball using the frame option over and over and over. Game changer for me.

Thank you. That was somehow not obvious.

Did you ever make a video of how to modify the scad? I have never used scad, and think this model would be awesome, but would need to make some adjustments.

Thank you very much for this!

Hi Thanks for the video, Please tell me why when i was changing the transformer there was only 2 wires to the doorbell , you have too many ,where do i put my 2 wires in the transformer to get 24 v Thanks

I have windows 11 and apparently, it doesn't like the software (It keeps not responding). Do you have any other software suggestions?

What about if the ungroup button or option is greyed out in cura?

There is no initiate

I need iTunes - Peace out bother!

Can I check. With tiny machines firmware. If run out of filament past the sensor will the bed cool down. Or does the bed stay at temperature?

@AhcMeUk can you please fix the link to scetch it is not works

finally, someone who goes through this in less than a million hours!!

What nozzle are you running in this?

Does it say energy consumption somewhere? A friend is going to buy me one in the USA and in my country the current is 220V, so I'm going to need a current transformer but I need to know the consumption, thank you.

I typed in your code exactly as you did, and ran everything the same, but I have this constant beeping noise. When I plug my earphones into my laptop, I can only hear the beep in there, and the keypad button for the project works fine. It is just that constant beeping. Any suggestions?

Really helpful, thank you. Other videos hadn't said how to turn on the fire function, key nugget for me, thanks!

When I search Package Center I don't see docker, only Container Manager. Am I missing a step, like adding other package sources?

for anyone wondering its, G28->Pre-Heat->G28->G29->M500

5w real power? can cut leather?

Hi nice video, can you confirm the name of the drawing software you used to produce the drawing in before sending it to the laser

Thank you so much i was so lost, you're a champion

i really appreciate this. I recently bought a Falcon 10w engraver, and after setting it all up, I thought it best to set up a camera because my laser wasn't firing when I tried framing or finding a start point, so I built a bunch of templates and set out a template bed. Then figured it may be best to buy a camera and use that. Then, I found your video and learned that you can set the fire option when framing. Cheers, saved myself a few quid that did.

Thank you 🤩

Anyone know if the chime volume can be changed on these Deta units? I cant see any knobs or anything in there. Its too loud it scares my cat 😂

Do you have to have the printer plugged in to PC to start print?

Can you please share the dimensions for laser holder plate?

Thank you for this thorough explanation. I have watched about a dozen videos and everyone clicks and moves things so quickly, without explanation that my head was spinning until I found yours!

Which printers other than Creality does this laser kit support??? Like does it works in Bambu lab a1 mini?

I wish UA-cam tutors would stop using 'from tkinter import *' This has been deprecated for years and you are teaching new programmers bad habits.

Quick question. I have the 10w version and connected or not to the computer my laser is on. I have to unplug the laser to keep from burning the frame. Do you have this issue and/or know a solution to this issue?

Love you bro you saved me hours

I forgot to put new spool of fillament onto the 3d printer and realized that at about 50% of the print done so this was really helpfull and the fillament change in the middle of the print went pretty well.

This is awesome, thank you as well.... unfortunately the file I am working with has only 3 parts, but after following your steps, Cura says it cannot create submeshes....also I noticed that Ungroup models is grayed out no matter what I try. So does this mean, that in no terms, this file cannot be separated and must print as it is? Thank You for any responses.

🤓

What program can you use other than lightburn

im doing all the steps, I get to separate parts, and my cura program just gets stuck loading. what can I do?

Thank you so much. The problem annoyed me so much, that i even wanted to stop learning pyqt and stay with tkinter😭. Thanks again🙏

Thank you for doing this video. I will give this a try next month.